NETGEAR 7000 Series Managed Switch - Manual (Page 40)

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
4-4 Using the Web Interface
v1.0, May 2008
The new PCC web interface has the following four new significant features:
1. A layout change: The new layout organizes the navigation pane into two rows of tags, as
shown in the following screen:
• Main Tags
The PCC provides the following main tags:
– System
This tag contains configuration and status information for system features and
services such as the timer, DNS server, IP address, and system resource usage.
– Switching
This tag contains features that relate to Layer 2 services such as VLANs, link
aggregation, spanning tree protocol, port configuration, and the MAC address table.
– Routing
This tag contains Layer 3 services such as VLAN routing, port routing, and protocols
such as RIP, OSPF, VRRP, and other protocols.
– QoS
This tag contains quality of service features such as DiffServ and CoS queue
assignment.
– Security
This tag contains security services such as 802.1x port authentication, traffic control
with various forwarding controls, and ACLs.
– Monitoring
This tag contains Ethernet port statistics, various system logs, and port mirroring.
– Maintenance
This tag contains services to perform a firmware upgrade, to save the configuration,
and to perform a backup of the configuration.
– Help
This tag provides access to the Netgear product support Web site and the online user
guide.
Figure 4-3