Example #1: create two lags – NETGEAR 7000 Series Managed Switch User Manual

Page 48

Advertising
background image

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

6-2

Link Aggregation

v1.0, May 2008

Figure 6-1

shows the example network.

Example #1: Create two LAGS

Use the show port-channel all command to show the logical interface ids you will use to identify
the LAGs in subsequent commands. Assume that lag_10 is assigned id 1/1/1 and lag_20 is
assigned id 1/1/2.

Figure 6-1

(Netgear Switch) #config

(Netgear Switch) (Config)#port-channel lag_10

(Netgear Switch) (Config)#port-channel lag_20

(Netgear Switch) (Config)#exit

(Console) #show port-channel all

Port- Link

Log. Channel Adm. Trap STP Mbr Port Port

Intf Name Link Mode Mode Mode Type Ports Speed Active

------ --------------- ------ ---- ---- ------ ------- ------ --------- ------

1/1/1 lag_10 Down En. En. Dis. Dynamic

1/1/2 lag_20 Down En. En. Dis. Dynamic

Advertising