Example #6: (interface) port security – NETGEAR 7000 Series Managed Switch User Manual

Page 152

Advertising
background image

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

17-4

Port Mirroring

v1.0, May 2008

Example #5: (Config) monitor session 1 source interface

Specify the source (mirrored) ports and destination (probe) port.

Example #6: (Interface) port security

(Netgear Switch Routing)(Config)#monitor session 1 source?

interface Configure interface.

(Netgear Switch Routing)(Config)#monitor session 1 source interface?

<slot/port> Enter the interface.

(Netgear Switch Routing)(Config)#monitor session 1 source interface 0/7

(Netgear Switch Routing)(Config)#monitor session 1 destination?

interface Configure interface.

(Netgear Switch Routing)(Config)#monitor session 1 destination interface?

<slot/port> Enter the interface.

(Netgear Switch Routing)(Config)#monitor session 1 destination interface 0/8

(Netgear Switch Routing)(Interface 0/7)#port-security ?

<cr> Press Enter to execute the command.

mac-address Add Static MAC address to the interface.

max-dynamic Set Dynamic Limit for the interface.

max-static Set Static Limit for the interface.

(Netgear Switch Routing)(Interface 0/7)#port-security max-static ?

<0-20> Set Static Limit for the interface.

(Netgear Switch Routing)(Interface 0/7)#port-security max-static 5

(Netgear Switch Routing)(Interface 0/7)#port-security max-dynamic 10

Advertising