NETGEAR 7000 Series Managed Switch - Manual (Page 113)

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Access Control Lists (ACLs) 9-37
v1.0, May 2008
13. Apply ACL 103 to port 24 and port 48:
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A
screen similar to the following displays.
b. Under Binding Configuration, make the following selection and enter the following
information:
• Select 103 from the ACL ID pulldown menu.
• In the Sequence Number field, enter 2.
c. Click Unit 1. The ports display. Configure the following ports:
• Click on the gray box under port 24. A flag appears in the box.
• Click on the gray box under port 48. A flag appears in the box.
d. Click Apply to save the settings.
Figure 9-38