NETGEAR 7000 Series Managed Switch User Manual
Page 111
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Access Control Lists (ACLs)
9-35
v1.0, May 2008
•
Next to Action mode, select the Permit radio button.
•
Select False from the Match Every pulldown menu.
•
Select IP from the Protocol Type pulldown menu.
e.
Click Apply to save the settings.
11. Apply ACL 102 to port 24:
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A
screen similar to the following displays.
b. Under Binding Configuration, make the following selection and enter the following
information:
•
Select 102 from the ACL ID pulldown menu.
•
In the Sequence Number field, enter 1.
c.
Click Unit 1. The ports display.
d. Click on the gray box under port 24. A flag appears in the box.
e.
Click Apply to save the settings.
Figure 9-36