NETGEAR 7000 Series Managed Switch - Manual (Page 193)

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
DHCP Server 24-5
v1.0, May 2008
Web Interface Procedure
To use the Web interface to create a DHCP server with a manual pool, proceed as follows:
1. From the main menu, select System > Services > DHCP Server > DHCP Server
Configuration. A screen similar to the following displays.
1. Next to Admin Mode, select the Enable radio button.
2. Click Apply to enable the DHCP service.
3. From the main menu, select System > Services > DHCP Server > DHCP Pool Configuration.
A screen similar to the following displays.
Figure 24-3