Figure 11. ethernet connector pinout, Safety standards, Electromagnetic compatibility – National Instruments Deterministic Ethernet Expansion Chassis NI 9144 User Manual
Page 17
© National Instruments Corporation
17
NI 9144 User Guide and Specifications
Figure 11. Ethernet Connector Pinout
Safety Standards
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or the
section.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
•
EN 61326 (IEC 61326): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
Note
For the standards applied to assess the EMC performance of this product, refer to the
section.
Connector 1
Connector 2
Pin 1
Pin 1
Pin 8
Pin 8