National Instruments Deterministic Ethernet Expansion Chassis NI 9144 - Manual (Page 32)

NI 9144 User Guide and Specifications 32 ni.com
Table 19 contains the default scan list.
NI 9211 Calibration Data
Calibration data is set up by the driver during initialization, and the
calibration conversion is performed on the module ADC itself.
NI 9213
Table 19. NI 9211 Scan List Format
Index Sub Type Value
0x2001 0 ARR:U32 7
1 6
2 0
3 1
... ...
7 5
Table 20. NI 9213 Vendor Configuration Extensions
Index Sub Type R/W Description
0x2001 0 ARR:U32 — Scan List = 19
1 R Channels to Convert = 1..18, default = 18
2..19 R/W Channel Code
0x2002 1 ARR:U32 R/W Conversion Speed Control = 2 or 15, default = 2
0x2003 0 U32 R Common Mode Range Error Detection Status
(also as 8-bit PDO)