Figure 9-2. s series pci device rtsi pinout, Using rtsi as outputs, Using rtsi as outputs -5 – National Instruments Network Device DAQ S User Manual
Page 125
Advertising
Chapter 9
Digital Routing and Clock Generation
© National Instruments Corporation
9-5
Figure 9-2. S Series PCI Device RTSI Pinout
Using RTSI as Outputs
RTSI <0..7> are bidirectional terminals. As an output, you can drive any of
the following signals to any RTSI terminal:
•
AI Start Trigger (ai/StartTrigger)
•
AI Reference Trigger (ai/ReferenceTrigger)
•
AI Convert Clock* (ai/ConvertClock)
•
AI Sample Clock (ai/SampleClock)
•
AO Sample Clock* (ao/SampleClock)
•
AO Start Trigger (ao/StartTrigger)
•
AO Pause Trigger (ao/PauseTrigger)
•
10 MHz Reference Clock
32
RTSI 6
34
RTSI 7
Table 9-1. RTSI Signals (Continued)
Terminal
RTSI Bus Signal
Terminal 2
Terminal 34
Terminal 33
Terminal 1
Advertising