National Instruments Network Device DAQ S - Manual (Page 19)

© National Instruments Corporation 2-1 NI 6124/6154 User Manual
2
DAQ System Overview
Figure 2-1 shows a typical DAQ system setup, which includes transducers,
signal conditioning, cables that connect the various devices to the
accessories, the S Series device, and the programming software. Refer to
Appendix A,
Device-Specific Information , for a list of devices and their
compatible accessories.
Figure 2-1. Typical DAQ System
1 Sensors and Transducers
2 Signal Conditioning
3 Cable Assembly
4 DAQ Hardware
5 Personal Computer/Chassis
and DAQ Software
2
4
3
5
+
V
–
1