National Instruments Network Device DAQ S - Manual (Page 48)

Chapter 4 Analog Input
© National Instruments Corporation 4-21 NI 6124/6154 User Manual
Getting Started with AI Applications in Software
You can use the S Series device in the following analog input applications:
• Simultaneous sampling
• Single-point analog input
• Finite analog input
• Continuous analog input
You can perform these applications through DMA, interrupt, or
programmed I/O data transfer mechanisms. Some of the applications also
use start and reference pause triggers.
Note For more information about programming analog input applications and triggers in
software, refer to the NI-DAQmx Help or the LabVIEW Help in version 8.0 or later.