Filtering, 1 configure a filtering rule, Chapter 10 filtering – ZyXEL Communications GS-4024 User Manual
Page 107: Figure 45 advanced application > filtering, Table 21 advanced application > filtering, Filtering (107)
GS-4012F/4024 User’s Guide
107
C
H A P T E R
1 0
Filtering
This chapter discusses MAC address port filtering.
10.1 Configure a Filtering Rule
Filtering means sifting traffic going through the Switch based on the source and/or destination
MAC addresses and VLAN group (ID).
Click Advanced Application > Filtering in the navigation panel to display the screen as
shown next.
Figure 45 Advanced Application > Filtering
The following table describes the related labels in this screen.
Table 21 Advanced Application > FIltering
LABEL
DESCRIPTION
Active
Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Name
Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification only.