ZyXEL Communications GS-4024 User Manual
Page 353
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
353
vlan <vlan-
list>
Specifies the VLAN IDs for
VLANs you want to disable
DHCP snooping on.
13
vlan <vlan-
list>
information
Sets the Switch to not add the
system name to DHCP requests
that it broadcasts to the DHCP
VLAN, if specified, or VLAN.
13
vlan <vlan-
list> option
Sets the Switch to not add the
slot number, port number and
VLAN ID to DHCP requests that
it broadcasts to the DHCP VLAN,
if specified, or VLAN.
13
database
Removes the location of the
DHCP snooping database.
13
database
timeout
Resets how long (10-65535
seconds) the Switch tries to
complete a specific update in the
DHCP snooping database before
it gives up to the default value
(300).
13
database write-
delay
Resets how long (10-65535
seconds) the Switch waits to
update the DHCP snooping
database the first time the
current bindings change after an
update to the default value
(65535).
13
dhcp dhcp-vlan
Disables DHCP VLAN on the
Switch.
13
diffserv
Disables DiffServ on the Switch.
13
ethernet oam
Disables Ethernet OAM on the
Switch.
13
igmp-filtering
Disables IGMP filtering on the
Switch.
13
profile <name>
Removes the specified IGMP
filtering profile.
13
profile <name>
start-address
<ip> end-
address <ip>
Clears the settings of the
specified IGMP filtering profile.
13
igmp-snooping
Disables IGMP snooping.
13
8021p-priority
Disables changing the priority of
outgoing IGMP control packets.
13
vlan <vlan-id>
Removes IGMP snooping
configuration on the specified
VLAN.
13
ip
Sets the management IP
address to the default value.
13
route <ip>
<mask>
Removes a specified IP static
route.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
PRIVILEGE