ZyXEL Communications GS-4024 - Manual (Page 334)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
334
45.12.2 Enable Mode
The following table describes the commands available for Enable mode.
Table 138 Command Summary: Enable Mode
COMMAND DESCRIPTION PRIVILEGE
baudrate
<1|2|3|4|5>
Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5
(115200). 13
boot config <index> Restarts the system with the
specified configuration file. 13
clear arp inspection filter Delete all ARP inspection filters
from the Switch. 13
arp inspection log Delete all ARP inspection log
entries from the Switch. 13
arp inspection statistics Delete all statistics records of
ARP packets going through the
Switch. 13
arp inspection statistics vlan
<vlan-list>
Delete statistics records of ARP
packets going through the Switch
for the specified VLAN(s). 13
dhcp snooping
database
statistics Delete all statistics records of
DHCP requests going through the
Switch. 13
loopguard Clears all loopguard counters. 13
configure Accesses Configuration mode.
See
Section 45.12.3 on page 343 .
13
copy running-config
tftp <ip>
<remote-file>
Backs up running configuration to
the specified TFTP server with the
specified file name. 13
running-config
interface port-
channel <port>
<port-list>
Clones (copies) the attributes
from the specified port to other
ports. 13
running-config
interface port-
channel <port>
<port-list>
[bandwidth-limit
....]
Copies the specified attributes
from one port to other ports. 13
tftp config <index>
<ip> <remote-
file>
Restores configuration with the
specified filename from the
specified TFTP server to the
specified configuration file on the
router. 13
flash <ip>
<remote-file>
Restores firmware via TFTP. 13
disable Exits Enable (or privileged) mode. 13
enable
Accesses Enable (or privileged)
mode. Enables the highest
privilege level for executing
commands. 0