ZyXEL Communications GS-4024 - Manual (Page 370)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
370
ge-spq <q0|q1|...|q7> Enables strict priority queuing
starting with the specified queue
and subsequent higher queues on
the Gigabit ports. 13
gvrp Enables this function to permit
VLAN groups beyond the local
Switch. 13
help Displays a description of the
interface port-channel commands. 13
igmp-filtering profile <name> Applies the specified IGMP
filtering profile. 13
igmp-group-
limited
Enables the IGMP group limiting
feature. 13
number <number> Sets the maximum number IGMP
groups allowed. 13
igmp-immediate-
leave
Enables the IGMP immediate
leave function. 13
igmp-querier-mode
<auto|fixed|edge>
Sets the IGMP query mode for the
port. 13
inactive Disables the specified port(s) on
the Switch. 13
ingress-check Enables the device to discard
incoming frames for VLANs that
are not included in a port member
set. 13
intrusion-lock Enables intrusion lock on the
port(s) and a port cannot be
connected again after you
disconnected the cable. 13
ipmc egress-
untag-vlan <vlan-
id>
Enables the port(s) to remove
specified VLAN tag from IP
multicasting packets before
forwarding. 13
loopguard Enables the loopguard feature on
the port(s). 13
mac-
authentication
Enables MAC authentication via a
RADIUS server on the port(s). 13
mirror Enables port mirroring in the
interface. 13
dir <ingress|
egress|both>
Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis. 13
multicast-limit Enables the port(s) multicast limit. 13
<pkt/s> Sets how many multicast packets
the port(s) receives per second. 13
Table 140 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE