ZyXEL Communications GS-4024 User Manual
Page 342
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
342
known-hosts
Displays known SSH hosts
information.
3
key
<rsa1|rsa|dsa>
Displays internal SSH public and
private key information.
3
session
Displays current SSH session(s).
3
subnet-vlan
Displays subnet based VLAN
settings on the Switch.
3
system-
information
Displays general system
information.
0
tacacs-server
Displays TACACS+ server
settings.
3
tacacs-accounting
Displays TACACS+ accounting
server settings.
3
time
Displays current system time and
date.
3
timesync
Displays time server information.
3
trunk
Displays link aggregation
information.
3
version
Displays the firmware version
running on the Switch.
0
flash
Displays the firmware version on
the flash memory of the Switch.
0
vlan
Displays the status of all VLANs.
3
<vlan-id>
Displays the status of the
specified VLAN.
3
vlan-stacking
Displays VLAN stacking settings.
3
vlan1q
gvrp
Displays GVRP settings.
3
port-isolation
Displays port isolation settings.
3
ssh <1|2>
<[user@]dest-ip>
Connects to an SSH server with
the specified SSH version.
0
[command </>]
Connects to an SSH server with
the specified SSH version and
addition commands to be
executed on the server.
0
test interface
port-
channel <port-
list>
Performs an internal loopback test
on the specified ports.
13
traceroute
<ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet
takes to a device.
0
help
Displays help information for this
command.
0
Table 138 Command Summary: Enable Mode (continued)
COMMAND
DESCRIPTION
PRIVILEGE