ZyXEL Communications GS-4024 - Manual (Page 341)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
341
<vlan-id> Displays the specified MVR group
settings. 3
policy Displays all policy related
information. 3
[name] Displays the specified policy
related information. 3
port-access-
authenticator
Displays all port authentication
settings. 3
[port-list] Displays port authentication
settings on the specified port(s). 3
port-security Displays all port security settings. 3
[port-list] Displays port security settings on
the specified port(s). 3
radius-accounting Displays RADIUS accounting
server settings. 3
radius-server Displays RADIUS server settings. 3
remote-management Displays all secured client
information. 3
[index] Displays the specified secured
client information. 3
router dvmrp Displays DVMRP settings. 3
igmp Displays global IGMP settings. 3
ospf Displays OSPF settings. 3
ospf area Displays OSPF area settings. 3
ospf network Displays OSPF network (or
interface) settings. 3
ospf redistribute Displays OSPF redistribution
settings. 3
ospf virtual-link Displays OSPF virtual link
settings. 3
rip Displays global RIP settings. 3
vrrp Displays VRRP settings. 3
running-config Displays current operating
configuration. 3
interface port-
channel <port-
list> [bandwidth-
limit...]
Displays current operating
configuration on a port by port
basis. Optionally specifies which
settings are displayed. 3
help Displays the help information for
this command. 3
service-control Displays service control settings. 3
snmp-server Displays SNMP settings. 3
spanning-tree config Displays Spanning Tree Protocol
(STP) settings. 3
ssh Displays general SSH settings. 3
Table 138 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE