ZyXEL Communications GS-4024 User Manual
Page 349
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
349
default-gateway
<ip>
Sets the default gateway’s IP
address for the out-of-band
management port.
13
name-server
<ip>
Sets the IP address of a domain
name server.
13
route
<ip> <mask>
<next-hop-ip>
Creates a static route.
13
<ip> <mask>
<next-hop-ip>
[metric
<metric>] [name
<name>]
[inactive]
Sets the metric of a static route
or deactivates a static route.
13
source binding
<mac-addr> vlan
<vlan-id> <ip>
Creates a static binding for
DHCP snooping and ARP
inspection.
13
interface port-
channel
<interface-id>
Specifies the port(s) for this static
binding.
13
lacp
Enables Link Aggregation
Control Protocol (LACP).
13
system-priority
<1-65535>
Sets the priority of an active port
using LACP.
13
logins username
<name>
password <pwd>
Configures up to four read-only
login accounts.
14
username <name>
privilege <0-
14>
Assigns a privilege level to user
accounts.
14
logout
Exits from the CLI.
0
loopguard
Enables loopguard on the
Switch.
13
mac-
authenticat
ion
Enables MAC authentication on
the Switch.
13
nameprefix <name-
string>
Sets the prefix appended to the
MAC address before it is sent to
the RADIUS server for
authentication.
13
password <name-
string>
Sets the password sent to the
RADIUS server for clients using
MAC authentication.
13
timeout <1-3000>
Specifies the amount of time
before the Switch allows a client
MAC address that fails
authentication to try and
authenticate again.
This settings is superseded by
the
mac-aging-time
command.
13
mac-aging-
time
<10-3000>
Sets learned MAC aging time.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
PRIVILEGE