ZyXEL Communications GS-4024 - Manual (Page 374)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
374
igmp query-max-
response-time <1-25>
Sets the maximum time that the
router waits for a response to an
general query message. 13
igmp last-member-
query-interval <1-25>
Sets the amount of time in
seconds that the router waits for
a response to a group specific
query message. 13
ospf authentication-
key <k>
Enables OSPF authentication in
this routing domain. 13
ospf authentication-
same-as-area
Sets the same OSPF
authentication settings in the
routing domain as the
associated area. 13
ospf cost <1-65535> Sets the OSPF cost in this
routing domain. 13
ospf message-digest-
key <k>
Sets the OSPF authentication
key in this routing domain. 13
ospf priority <0-255> Sets the OSPF priority for the
interface. Setting this value to 0
means that this router will not
participate in router elections. 13
rip direction
<Outgoing|Incoming|Bo
th|None> version
<v1|v2b|v2m>
Sets the RIP direction in this
routing domain as well as the
version number. 13
vrrp authentication-
key <k>
Sets the VRRP authentication
key in the routing domain. 13
no ip dvmrp Disables DVMRP in this routing
domain. 13
ip igmp Disables IP IGMP in this routing
domain. 13
ip ospf
authentication-key
Disables OSPF authentication
key settings in this routing
domain. 13
ip ospf
authentication-sama
Sets the routing domain not to
use the same OSPF
authentication settings as the
area. 13
ip ospf cost Disables the OSPF cost in the
routing domain. 13
ip ospf message-
digest-key
Sets the routing domain not to
use a security key in OSPF. 13
ip ospf priority Resets the OSPF priority for the
interface. 13
ip vrrp
authentication-key
Resets the VRRP authentication
settings. 13
Table 141 interface route-domain Commands (continued)
COMMAND DESCRIPTION PRIVILEGE