Yamaha SRCP - Manual (Page 150)

10-
4
10
OTHER OPERA
TIONS
10-2 DIO Monitor Display
10-2 DIO Monitor Display
Data indicating whether the I/O signals are on or off can be displayed on the screen. The operation
procedure is explained below.
10-2-1 Display from the monitor menu
1) On the initial screen, press F4 (MON).
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[MON]
[MON-DIO]
select menu
1DIO 2DUTY
DI 00000000 00000000
DO 10100000 O:0 S:1
2) Next, press F1 (DIO).
3) The ON/OFF status of I/O signals is displayed.
For information about what the display shows,
refer to "4-3-4 DIO monitor screen".
4) To return to the initial screen, press ESC
twice.