Yamaha SRCP - Manual (Page 164)

10-
18
10
OTHER OPERA
TIONS
10-6 Using a Memory Card
10-6-3 Formatting a memory card
1) Insert the memory card into the TPB.
2) On the initial screen, press F3 (SYS).
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[SYS]
select menu
1PRM 2B.UP3INIT
[SYS-B.UP]
select menu
1SAVE2LOAD3FMT 4ID
[SYS-B.UP]
format OK ?
1yes 2no
[SYS-B.UP]
formatting
4next
[SYS-B.UP]
select menu
1SAVE2LOAD3FMT 4ID
3) Next, press F2 (B.UP).
4) Press F3 (FMT).
Press F1 (CARD) before pressing F3
(FMT) if the SRCP controller version is 24.10
or later and the TPB version is 12.51 or later.
5) A confirmation message appears.
To format the memory card, press F1 (yes).
To cancel, press F2 (no).
6) This screen is displayed while the memory card
is being formatted.
7) When formatting is complete, the screen returns
to step 4.
c
CAUTION
Never eject the memory card during formatting.
Do not leave the memory card inserted into the TPB when not in use. This shortens the backup battery life.