Yamaha SRCP - Manual (Page 162)

10-
16
10
OTHER OPERA
TIONS
10-6 Using a Memory Card
10-6-2 Loading data from a memory card
1) Insert the memory card into the TPB.
2) On the initial screen, press F3 (SYS).
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[SYS]
select menu
1PRM 2B.UP3INIT
[SYS-B.UP]
select menu
1SAVE2LOAD3FMT 4ID
[B.UP-LOAD]
select card AREA
AREA _ [0-47]
1ID
[B.UP-ID]
AREA 0 : 03.09.01
AREA 1 : 03.09.10
AREA 2 :
4next
3) Next, press F2 (B.UP).
4) Press F2 (LOAD).
Press F1 (CARD) before pressing F2
(LOAD) if the SRCP controller version is 24.10
or later and the TPB version is 12.51 or later.
5) Specify the load area in the memory card.
Enter the load area with the number keys and
press
.
6) The saved status of data on the memory card
can be checked by pressing
F1
(ID) in step 5.
To check the saved status in AREA 3 onward,
press
STEP
UP
or STEP
DOWN to scroll the screen. To re-
turn to the screen in step 5, press ESC .