Xantrex Technology XDI2048 - Manual (Page 24)

Rack Mount Frame Assembly and Installation
2-4 TM-DIOP-01XN-01
Introduction
You can use the Inverter in rack-mounted applications. Alternate
configurations can be created for custom applications.
1. AC Output Terminal Block
2. AC Output Ground Stud
3. Ethernet card (optional)
4. Can/Sync Connector
5. DC Input Ground Stud
6. User Lines Connector
7. DC Input Terminal Block
8. Air Vents
Figure 2-3 Rack Mount Frame Rear View
1 2 3 4 5 6 7 1 2 3 4 5 6
CAN/SYNC USER LINES
ETHERNET
1 3 5 7 8
2 4 6
WARNING
The XDI is intended for installation in a restricted access location. This is an area
intended for qualified or trained personnel only, access to which is controlled by
a locking mechanism (for example, a key lock or an access card system).