Automatic power-on email, How to use the web interface – Xantrex Technology XDI2048 User Manual
Page 67
Advertising
Operating Instructions
TM-DIOP-01XN-01
4-13
Automatic Power-On Email
When the inverter is turned on, it will attempt to send an email to the
configured “Email Alert Address” using the configured “SMTP Server”.
Contents of the email:
From: XDI <serial number>
To: <Email Alert Address>
Subject: Unit powered on
Body:
IP address: <IP_address>
How to Use the Web Interface
To communicate to the Web interface the active IP must be entered into
the “Address” box of your Web browser. i.e. “192.168.1.1”. The “Manage
page” will be displayed and it will contain links to monitor and setup the
inverter. You will have access to the “Manage page”, described on
page 4–14, the “Setup page”, described on page 4–15, and the “Monitor
page”, described on page 4–17.
Advertising