Xantrex Technology XDI2048 - Manual (Page 59)

Initial Setup
TM-DIOP-01XN-01 4-5
Ethernet Setup
You must run a Web browser to communicate and configure the XDI
Ethernet. Microsoft Internet Explorer or Netscape Communicator are
such examples.
Configure Ethernet settings:
1. Run your Web browser program.
2. In the address box type in the “Default IP” (Table 4-1).
3. Select the “Setup” link located on the upper left hand side.
4. Configure the Ethernet settings to your unique setup (see “Setup
Page” on page 4–15).
Important: Ensure that the unit’s IP address is unique on the network.
Ensure the computer’s IP address and sub-net mask are compatible with the
unit’s. (contact network administrator for details).
Table 4-1 Default Settings
Setting Default Value
Default IP 192.168.1.1
Gateway IP 0.0.0.0
Sub-Net Mask 255.255.255.0
Domain Name Server 1 0.0.0.0
Domain Name Server 2 0.0.0.0
SMTP (email) Server none
Email Alert Address none
Password 12345
Important: Be careful when you change the network settings. If they are
changed to a value where communication can not be established any more, a hard
reset must be done (see “Resetting” on page 4–6).