Vitek VT-4060 SR - Manual (Page 2)

ENGLISH
2
VT- 4060SR
DVD 5.1 HOME THEATRE SYSTEM
CAUTION! IN ORDER TO AVOID ELECTRICAL SHOCK, FIRST
CONNECT THE CORD TO THE PLAYER, AND THEN INSERT PLUG
INTO THE ELECTRICAL OUTLET.
CAUTION! This device contains a DVD player that uses a laser system.
Do not open the case in order to avoid exposure to laser radiation.
Invisible laser radiation is present when the case is open. DO NOT LOOK
AT THE LASER RAYS. Furthermore, use of the control system or making
adjustments or completing operations, other than those described in
these instructions, can lead to dangerous exposure to radiation.
We urge you to carefully study these operating instructions and save
them for future use. Contact a service center (if necessary) for service
and repairs.
CAUTION! DO NOT OPEN THE UPPER HOUSING OF THE DEVICE DUE
TO RISK OF ELECTRIC SHOCK. THERE ARE NO USER-SERVICEABLE
PARTS INSIDE. EMPLOY THE SERVICES OF QUALIFIED PERSONNEL.
ATTENTION
IN ORDER TO AVOID ELECTRICAL SHOCK, THE WIDE PRONG OF THE
PLUG SHOULD BE FIRMLY AND COMPLETELY INSERTED INTO THE
OUTLET. WATER MUST NOT SPILL INTO THE DEVICE. DO NOT PLACE
CONTAINERS OF LIQUIDS, LIKE VASES, ONTO THE DEVICE.
Features
Thank you for purchasing our product. Please read this manual carefully
before connection and operation. Please keep this manual for future
reference. This DVD player is a new generation home player which can
produce high quality video and audio for your continued enjoyment.
•
built in Dolby D , LPCM, MPEG etc. digital audio decoder;
• Hi Fi, 96kHz/24bit audio digital processor;
• COAXIAL digital audio output;
• compatible with DVD/VCD/CD/MP3/JPEG/ PICTURE CD/MPEG4
etc.;
• AM/FM stereo d igital tuning system;
• high quality amplifier.
IMPORTANT NOTICES:
CAUTION: Is it important that you read and follow all of the instructions
in this booklet and any marked on the unit itself. Retain this booklet
for future reference. Accessories
Never place this product on an
unstable platform, stand, cart, wall mount, shelf or table. The product
may fall, causing serious personal injury to person and pet, as well as
seriously damaging the product. Any mounting of the product should
follow the manufacturer s instruction, and use a mounting accessory
recommended by the manufacturer. This unit while positioned on some
type of cart must be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and cart combination to
overturn. The apparatus shall not be exposed to dripping or splashing
and that no object filled with liquids, such as vases, shall be placed on
the apparatus.
Cleaning
Always unplug this unit from the wall electrical outlet before cleaning. Do
not use liquid or aerosol cleaners; use a damp cloth for cleaning.
Lightning
For added product protection during a lightning storm or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and/or disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power line surge.
Object and Liquid Entry
Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any kind on or into
the product.
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so as to provide
protection against voltage surges and built up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and sup porting structure,
grounding of the lead in wire to an antenna discharge unit, size or
grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
Overloading
Do not overload wall outlets, extension cords, or integral convenience
receptacles, as this may result in a fire or electric shock.
Power
Cord Protection Power supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
Power Lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where
it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
Power Sources
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power or
other sources, refer to the operating instruction. The DVD home theater
operates on 100 240V~50/60Hz. Do not turn off unit immediately after
turning on; wait at least 10 seconds.
Replacement Parts
If replacement parts are required, be sure the service technician has
used replacement parts specified or have the same characteristics as
the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Safety Check
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
Servicing
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
TV System
This unit is compatible with television sets featuring either the NTSC or
PAL color system.
Ventilation
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation and protection from overheating. These
openings should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. The product should not be placed in a
built in installation such as a bookcase or rack unless proper ventilation
is provided. Never place this product near a heat source, such as heat
registers, stoves, radiators, or any other product that produces heat.
Water and Moisture
Do not use this product near sources of water and moisture, such as
bath tub, wash bowl, kitchen sink, or wash machine; in a wet, damp
basement; or near a swimming pool or similar locations. If moisture
condensation occurs, remove any disc, connect the unit power cord to
a wall outlet, turn the unit on, and leave it on for two to three hours. By
then, the unit will have warmed up and evaporated any moisture.
The lightning bolt in a triangle symbol indicates to the
user that there are dangerous voltages inside the device
that can result in electrical shock.
The exclamation point in a triangle symbol indicates to
the user important operating instructions and technical
service information in the accompanying literature.
Indicates a device using a laser. This symbol
must be located on the rear panel of a
device, indicating that the device contains a
Class 1 laser and that laser rays are in use.
The possibility of laser exposure does not
exist without opening the device.
CLASS 1
LASER PRODUCT
CAUTION
Risk of electric shock
DO NOT OPEN
WARNING: In order to reduce the risk of fire or electrical shock,
do not remove the device panels. Contact qualified personnel for
service and repairs.
4060.indd 2 4060.indd 2 23.10.2006 9:25:11 23.10.2006 9:25:11