Garmin G1000 Quest Kodiak - Manual (Page 127)

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
GPS NAVIGATION
5-11
Enabling/disabling topo data and select a topo data range:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2) Press the ENT Key. The Map Setup MENU is displayed.
3) Select the ‘Map’ group.
4) Press the ENT Key.
3) Highlight the ‘TOPO DATA’ field.
4) Select ‘On’ or ‘Off’.
5) Highlight the range field. TOPO ranges are from Off to 2000 nm.
6) To change the TOPO range setting, turn the small FMS Knob to display the range list.
7) Select the desired range.
8) Press the ENT Key.
Topo Scale
The topo scale setting enables or disables the topography range box located in the lower right corner
of the Navigation Map.
Enabling/disabling the topo range box:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2) Press the ENT Key. The Map Setup MENU is displayed.
3) Select the ‘Map’ group and press the ENT Key.
4) Highlight the ‘TOPO Range’ field.
5) Select ‘On’ or ‘Off’.
6) Press the FMS Knob to return to the Navigation Map Page.