Garmin G1000 Quest Kodiak - Manual (Page 300)

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 A-4
APPENDIX A
MESSAGE ADVISORY ALERTS
Alerts Window Message Audio Alert
GIA FAN FAIL – The cooling fan for the GIAs is inoperative. None
PFD1 FAN FAIL – The cooling fan for PFD1 is inoperative. None
PFD2 FAN FAIL – The cooling fan for PFD2 is inoperative. None
MFD FAN FAIL – The cooling fan for the MFD is inoperative. None
G1000 SYSTEM ANNUNCIATIONS
When a new alert is issued, the ALERT Softkey will flash to alert the pilot of a new message. It will continue
to flash until acknowledged by pressing the softkey. Active alerts are displayed in white text. Alerts that have
become inactive will change to gray text. The
ALERT Softkey will flash if the state of a displayed alert changes
or a new alert is displayed. The inactive alerts can be removed from the Alert Window by pressing the flashing
ALERT Softkey.
The G1000 System Messages convey messages to the pilot regarding problems with the G1000 system. When
an LRU or an LRU function fails, a large red ‘X’ is typically displayed on windows associated with the failed data.
The following section describes various system annunciations. Refer to the POH for additional information
regarding pilot responses to these annunciations.