Garmin G1000 Quest Kodiak - Manual (Page 144)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-00 Rev. C
GPS NAVIGATION
5-28
Selecting a Direct-to destination to a flight plan waypoint:
1) While navigating an active flight plan, press the Direct-to Key.
2) Turn the small FMS Knob to the left to display a list of flight plan waypoints as shown in Figure 5-23.
Figure 5-23 Flight Plan Waypoint List
3) Select the desired waypoint.
4) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’.
5) Press ENT again to activate a Direct-to.
Selecting a Direct-to destination to a nearest airport:
1) Press the Direct-to Key.
2) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-24. The list
is populated only when navigating a flight plan.