Garmin G1000 Quest Kodiak - Manual (Page 23)

SYSTEM OVERVIEW
1-13 190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
SOFTKEY FUNCTION
The softkeys are located along the bottoms of the displays. The softkeys shown depend on the softkey level
or page being displayed. The bezel keys below the softkeys can be used to select the appropriate softkey. When
a softkey is selected, its color changes to black text on gray background and remains this way until it is turned
off, at which time it reverts to white text on black background.
In the following descriptions, top level softkeys are denoted by bullets.
Softkey Names
(Displayed)
Figure 1-9 Softkeys (Second-Level PFD Configuration)
Bezel-Mounted
Softkeys (Press)
Softkey
On
Softkey Selection
Box (Light Blue)
The MFD/PFD Control Unit can also be used to select softkeys.
PFD SOFTKEYS
.
Softkey OFF Softkey ON
OBS TMR/REF NRST INSET IDENT XPDR CDI PFD ALERTS
Figure 1-10 PFD Top Level Softkeys
INSET – Press to display the Inset Map in the lower left corner of the PFD.
OFF – Press to remove the Inset Map.
DCLTR (3) – Press momentarily to select the desired amount of map detail. The declutter level appears adjacent to the
DCLTR softkey.
• No declutter: All map features are visible
• Declutter – 1: Declutters land data
• Declutter – 2: Declutters land and SUA data
• Declutter – 3: Removes everything except the active flight plan
TRAFFIC – Press to display traffic on the inset map.
TOPO – Press to display topographical data (i.e., coastlines, terrain, rivers, lakes) and elevation scale on the Inset
Map.