Garmin G1000 Quest Kodiak - Manual (Page 60)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-00 Rev. C 2-16
FLIGHT INSTRUMENTS
As the aircraft crosses the missed approach point (MAP), automatic approach waypoint sequencing is
suspended. ‘SUSP’ appears on the HSI (to the lower right of the aircraft symbol) in place of ‘OBS’ and the
OBS Softkey label changes to SUSP. Pressing the SUSP Softkey resumes automatic of approach waypoints.
Enabling/disabling OBS Mode while navigating with GPS:
1) Press the OBS Softkey to select OBS Mode.
2) Turn the CRS Knob to select the desired course to/from the waypoint.
3) Press the OBS Softkey again to return to normal operation.
Figure 2-25 Suspending Automatic Waypoint Sequencing
SUSP Softkey Suspends
Waypoint Sequencing
SUSP
Annunciation