Garmin G1000 Quest Kodiak - Manual (Page 15)

SYSTEM OVERVIEW
1-5 190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
1.3 SECURE DIGITAL (SD) CARDS
NOTE: Ensure the G1000 System is powered off before inserting an SD card.
NOTE: Refer to Appendix B for instructions on updating the aviation database.
The PFD and MFD data card slots use Secure Digital (SD) cards and are located on the upper right side of the
display bezels. Each display bezel is equipped with two SD card slots. SD cards are used for aviation database
and system software updates as well as terrain database storage.
Ins talling an SD card:
1) Insert the SD card in the SD card slot (the front of the card should be flush with the face of the display bezel).
2) To eject the card, gently press on the SD card to release the spring latch.
Figure 1-1 Display Bezel SD Card Slots
SD Card Slots