Garmin G1000 Quest Kodiak - Manual (Page 17)

SYSTEM OVERVIEW
1-7 190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
Figure 1-2 PFD Initialization Figure 1-3 MFD Power-Up Splash Screen
1.5 SYSTEM OPERATION
NOTE: In normal operating mode, backlighting can only be adjusted from the PFD. In reversionary mode, it
can be adjusted from the remaining display.
The displays are connected together via a single Ethernet bus for high-speed communication. Each IAU is
connected to the on-side display. This section discusses normal and reversionary G1000 display operation, as
well as the various AHRS modes and G1000 System Annunciations.
NORMAL DISPLAY OPERATION
In normal operating mode, the PFD presents graphical flight instrumentation (attitude, heading, airspeed,
altitude, vertical speed), replacing the traditional flight instrument cluster (see the Flight Instruments Section
for more information).
The MFD normally displays a full-color moving map with navigation information (see the GPS Navigation
Section), while the left portion of the MFD is dedicated to the Engine Indication System (EIS; see the EIS
Section).
Both displays offer control for COM and NAV frequency selection.