Garmin G1000 Quest Kodiak - Manual (Page 32)

SYSTEM OVERVIEW
1-22 190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
The Flight Plan pages are accessed using the FPL Key on the MFD. Main pages within this group are selected
by turning the small FMS Knob.
The Procedure Loading pages may be accessed at any time on the MFD by pressing the PROC Key. A menu
is initialized, and when a departure, approach, or arrival is selected, the appropriate Procedure Loading page is
opened. These pages can also be accessed from the Active and Stored Flight Plan pages using the LD softkeys.
Turning the FMS Knob does not scroll through the Procedure Loading pages (note the single page icon in the
lower right corner).
Information on optional electronic checklist pages is offered later in this section. Checklist pages may be
accessed from any page on the MFD using the CHKLIST Softkey.
SYSTEM SETUP AND STATUS
In the Auxiliary (AUX) Page Group, there are two system pages: System Setup and System Status. The System
Setup Page allows management of various system parameters, while the System Status Page displays the status
of all G1000 System LRUs.
AUX - SYSTEM SETUP PAGE
The System Setup Page allows management of the following system parameters:
• Time display format (local or UTC )
• Displayed measurement units
• Map datum
• Airspace alerts
• Arrival alert
• Audio alert voice
• MFD Data Bar (Navigation Status Box) fields
• GPS Course Deviation Indicator (CDI) range
• COM transceiver channel spacing
• Displayed nearest airports