Garmin G1000 Quest Kodiak - Manual (Page 283)

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 6-51
HAZARD AVOIDANCE
SKYWATCH TAS SYMBOLOGY
SKYWATCH uses the following Traffic Map symbols (Table 6-9):
TIS Symbol Description
Non-Threat Traffic
Proximity Advisory (PA)
Traffic Advisory (TA)
Traffic Advisory Off Scale
Table 6-9 TAS Symbol Descriptions
SWITCHING FROM STANDBY MODE
The unit must be in operating mode for traffic to be displayed. The ability to switch out of standby into
operating mode on the ground is especially useful for scanning the airspace around the airport before
takeoff.
Switching to operating mode from standby mode:
1) On the Traffic Page, press the OPERATE Softkey.
OR :
1) Press the MENU Key.
2) Turn the small FMS Knob to select ‘Operating Mode’.
3) If ‘Operating Mode’ is selected from the FMS menu, press the ENT Key to confirm and place SKYWATCH in
operating mode.
4) To switch to Standby Mode from the Traffic Page, press the STANDBY Softkey.