AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN - Manual (Page 30)

Installation, Administration and Maintenance
Aastra depl-0900/0.4 Page: 30 (104)
If you want to read the configuration parameters from an RFP set the MAC
address and the IP address additionally and press the “List configuration”
button. All parameters will be listed in the OM Configurator tool.
Press the “Reset configuration" button to clean all input fields and additional
parameters.
Since the OpenMobility version 1.5, login data can be used to prevent
against unauthorized configuration changes. If authorization is used, mark
the ‘Login’ check box and enter the user name and the password into the
fields ‘User’ and ‘Password’. This OM Configurator is backward compatible to
previous OpenMobility versions without login support.
A forgotten password couldn’t be recovered but deleted using the ‘Factory
defaults’ button. Send the displayed cookie to the OpenMobility manufacturer
support. After receiving the password reset key from the support, enter it into
the ‘Enter reset key’ dialog. This will delete the complete local configurations
from the internal flash memory of the RFP, too!
WARNING: With the password reset all local configurations inclusively
possible existing OpenMobility configurations will be deleted.
A RFP outside the local LAN segment could also work as proxy. Mark the ‘as
proxy’ check box to enable this functionality. Then the MAC address will be
used to address a RFP in the LAN segment of the proxy RFP. Scanning for
available RFPs’ and configuration of multiple RFPs’ via a configuration file
could be used also with the proxy mechanism.