AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN - Manual (Page 54)

Installation, Administration and Maintenance
Aastra depl-0900/0.4 Page: 54 (104)
Note: The authentication code can only be changed if the PP is not
subscribed. The PP name can be changed, but this will not take effect until
the PP is subscribed again.
The Additional ID can be used as a mean for data search within wildcard
subscription (because of the IPEI is not configured which selects the data
otherwise).
The SIP Authentication User Name is optional but recommended. It
represents the name which will be used during SIP registration and
authentication. If no name is given the number will be used by default. The
password will be used during SIP registration and authentication.
Editing Portable Parts in the SIP-DECT system
A popup window appears when configuring an existing PP by pressing the
tool icon
. The only difference between the popup window for adding and
editing PP units is the delete subscription checkbox. If this option is selected,
the PP will be unsubscribed.
Deleting Portable Parts in the SIP-DECT system
Deleting of a PP can be done by pressing the dust bin icon . A popup
window appears and asks for confirmation.
3.3.4.1.2 Import by configuration files
A set of PPs’ can also be configured in a semiautomatic manner by import of
a configuration file. Please press the “Import” button to navigate to the
referring sub menu:
Select your configuration file and press the “Import” button (see Appendix
8.3.1 to get information about file layout ). A parsing protocol can be read, if
you press the referring “Logfile” button. All successfully imported data
records are presented in a list: