AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN - Manual (Page 46)

Installation, Administration and Maintenance
Aastra depl-0900/0.4 Page: 46 (104)
and filename where the database is to be saved. Afterwards press the “Save”
button.
If the database is exported to WEB browser’s file system (Protocol: FILE) the
database will be saved into a file the user specifies.
3.3.2.5.3 Automatic Database Import
The automatic database import feature makes it easier to restore a prepared
OMM database into an OMM for an initial configuration or for update
reasons.
The database file for an automatic import has to be configured in an URL
format like
{ftp|ftps|http|https}://[[user:password@]server]/[directory/]file
or
tftp://server]/[directory/]file
To be available at OMM start-up time and to allow an initial configuration via
automatic import, this URL has to be specified via DHCP (option 24 / see
chapter 3.1.4) or OM Configurator (see chapter 3.2).
If such a URL is given by DHCP or OM Configurator, the OMM tries to import
a configured database file automatically during OMM start-up.
In addition to the start-up import, the WEB service allows to
activate/deactivate the automatic database import at a configurable time of
day. If “Startup and periodically” is activated the OMM tries to import the
configured database file during start-up and at the configured time of day.
The file URL configured via DHCP or OM Configurator is always displayed.
WARNING: For an automatic database import at a configured time is a time
synchronisation with a NTP server recommended. For NTP server
configuration see chapter 3.1.4 and chapter 3.2.