AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN - Manual (Page 53)

Installation, Administration and Maintenance
Aastra depl-0900/0.4 Page: 53 (104)
The column “Download” is only presented if the Download over Air feature is
started successfully and gives information about the download status (see
chapter 6).
3.3.4.1 Creating and Changing PPs’
3.3.4.1.1 New, change and delete button
Adding Portable Parts to the SIP-DECT system
A new PP can be added to the system by pressing the “New” button. The
following popup window appears allowing the configuration of a new PP.
The Name parameter represents the SIP Display Name field. This parameter
is optional but recommended.
The Number is the SIP account number or extension for the PP.
The IPEI is the DECT 142 handset IPEI number which can be found in the
System Options menu of the DECT 142 handset.
The DECT authentication code is used during initial DECT subscription as a
security option and can be set here for each PP separately. If a global DECT
authentication code is given on the “System Settings” web page this value is
filled in here as default. This parameter is optional.