AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN - Manual (Page 33)

Installation, Administration and Maintenance
Aastra depl-0900/0.4 Page: 33 (104)
Configurator tool. All other RFPs’ in the deployment are configured to point
back to the OMM in the deployment.
The OMM can be configured via HTTP/HTTPS. The OMM acts as a
HTTP/HTTPS server. The HTTP server binds to port 80 and HTTPS binds to
port 443 by default. The configuration data will be read from the internal flash
memory.
The configuration is stored in a human readable ASCII file. Changing the
configuration file outside the OMM is not permitted.
The configuration file can be downloaded and uploaded via the web
interface.
The service access is restricted to one active session at a time and is
password protected.
The browser used for service access has to be at least Microsoft Internet
Explorer 6.0 or Mozilla Firefox 1.5 and must have frame support, JavaScript
and cookies enabled.
3.3.1 Service Login procedure
The OMM allows only one user at a time to configure the system. A user
must authenticate with a user name and a password. Both strings are
checked case sensitive.
With initial installation or after removing the configuration file the
OpenMobility service is accessible via a default build-in user account with
user “
omm ” and password “ omm ”.
With the first login into a new OpenMobility version the user has to accept the
End User Licence Agreement (EULA).