AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN - Manual (Page 87)

Installation, Administration and Maintenance
Aastra depl-0900/0.4 Page: 87 (104)
Next, the defined trace options (Event Mask) are sent to the OMM. The options
which are sent to the OMM are always those which were active the last time the
program was exited.
If the trace option "Transaction establish/release" is activated, the OMM will
deliver all existing transactions.
Following this, the OMM system delivers the desired trace data. The user can
either communicate with the program interactively (see below) or he can
simply activate a log file in which to record the data.
Following this initialisation, the user can carry out the following modifications:
• The trace settings can be modified using the menu item Options-Event
Mask. Transmission to the OMM takes place after confirmation of the
settings with <OK>.
• A Config Request can be sent again to the OMM.
• A log file can be activated.
• By means of various dialogues, the configuration data of the telephones,
RFPs and control modules can be displayed and stored in ASCII files.
The following information is displayed dynamically in the tables:
• Transactions between telephone and DECT system. These are displayed
in both tables. Simple transactions are displayed in black on a white
background; during handover, both transactions involved are displayed in
white on a red background.
• The Location Registration and Detach events are displayed in the tables
for approx. 1-2s after their occurrence (light green background), if
possible. There is no display in the FP table if there is no column free for
display. If the event has already been displayed, it can be overwritten at
any time. The events are not displayed if they occur during an on-going