AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN - Manual (Page 97)

Installation, Administration and Maintenance
Aastra depl-0900/0.4 Page: 97 (104)
8.3.2 RFP configuration file/central (OMM database)
8.3.2.1 Supported Instructions
All instructions are taken as common value, which are set to all records of
data sequence section of that file if the corresponding field is empty
• name
Location name
• active
Activation of DECT: {0=inactive, 1=active}
• cluster
Cluster, the RFP is referred to: {1..256}
• wlan_profile
Reference key to an existing WLAN profile
• wlan_antenna
Antenna settings: = {0=diversity, 1, 2}
• wlan_channel_bg
{0..14 (size depends on regulatory domain) }
• wlan_power
• { 6, 12, 25, 50,100 (in percent)}
• wlan_act
Activation of WLAN: {0=inactive, 1=active}
8.3.2.2 Data section fields
The data sections contains the following field order:
1. MAC address
2. Location name
3. DECT active
4. Cluster
5. WLAN profile reference
6. WLAN antenna
7. Channel_bg
8. WLAN power
9. WLAN active
8.3.2.3 Example
RFP configuration file/central:
# ---------------------#
# instruction section:
# ---------------------#
# -- name = {<location name>}
# -- active = {0,1}
# -- cluster = {1..256}
# -- wlan_profile = <valid reference to an existin WLAN profile>}