AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN - Manual (Page 49)

Installation, Administration and Maintenance
Aastra depl-0900/0.4 Page: 49 (104)
When the RFPs’ are connecting the OMM they submit their HW type. This
type is displayed on the RFP list web page.
3.3.3.1 Creating and Changing RFPs’
3.3.3.1.1 New, change and delete button
New RFPs’ can be added to the system by pressing the “New” button. A
popup window appears providing the configuration of a new RFP.
Each RFP is identified by its MAC address (6 bytes hex format, colon
separated). The ethernet address is unique and can be found on the back of
the chassis.
For easier administration each RFP can be associated with a location string.
The location string can hold up to 20 characters.
The DECT functionality for each RFP can be switched on/off. If DECT is
active the RFP can be assigned to a cluster.
The WLAN section is only destined for RFP L42 WLAN.
In the ‘WLAN settings’ section of the page can be select Profile, Antenna
Diversity, Antenna, Output Power Level and Channel. Antenna Diversity
should generally be activated (i.e. ticked) so that the AP can automatically
select the antenna with the best transmission and reception characteristics.
Important note:
A RFP which is configured as OMM cannot simultaneously operate as a
WLAN Access Point.
For details about WLAN configurations please see chapter 3.3.5.
The same popup window could be opened for an existing RFP by pressing
the tool icon
of the appropriate RFP.
A RFP could be deleted by pressing the trash can icon . A similar popup
window asks for confirmation showing the current configuration of this RFP.
3.3.3.1.2 Import by configuration files