AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide EN - Manual (Page 9)

Installation, Administration and Maintenance
Aastra depl-0900/0.4 Page: 9 (104)
2.2 About the Access Points (RFPs’)
Aastra DeTeWe provides 3 kind of Access Points:
-
RFP L32
DECT Access Point as indoor model
-
RFP L34
DECT Access Point as outdoor model
-
RFP L42 WLAN
DECT + WLAN Access Point as indoor model
In general the RFP 32 and RFP 34 have the same hardware and software
capabilities. Please be aware of the regulatory differences between North
America and all other areas of the world . These differences lead to different
RFP 32/34 variants which use specific frequency bands and field strengths:
• RFP 32 NA or RFP 34 NA (NA)
- Frequency Band 1920 to 1930 MHz
- 5 carrier frequencies
- Transmit Power 20 dBm
• RFP L32 IP or RFP L34 IP (EMEA)
- Frequency Band 1880 to 1900 MHz
- 10 carrier frequencies
- Transmit Power 24 dBm
The RFP L42 WLAN is only available for the EMEA region.
One RFP within a SIP-DECT installation must be declared to operate as the
OpenMobility Manager (OMM). The RFP acting as the OMM may also act as
a regular RFP as well if it is included into a DECT Cluster.