Configuring a services key, Line keys and softkeys – AASTRA 6737i User Guide EN User Manual
Page 107
Line Keys and Softkeys
41-001452-00 Rev 01 – 06.2013
100
Configuring a Services Key
Use the following procedure to configure a Services key on the 6737i IP Phone. The procedure shows the top softkeys
screen as an example.
Aastra Web UI
Note:
By default, the Services key is Key 1 on the Top Softkeys.
1.
Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2.
Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3.
In the "Type" field, select Services.
4.
In the "Label" field, enter a label to apply to this key.
5.
(Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6.
Select from “Key 1” through “Key 36” (M670i)
or
Select from “Key 1” through “Key 60” (M675i)
7.
In the "Type" field, select Services.
8.
(M675i) In the "Label" field, enter a label to apply to this key.
9.
Click Save Settings.