AASTRA 6737i User Guide EN - Manual (Page 83)

Line Keys and Softkeys
41-001452-00 Rev 01 – 06.2013
76
3. Using the keypad, enter your User ID (phone number provided by your System Administrator).
Using the keypad, enter your Password (provided by your System Administrator) and press the Log In Key.
Note:
Use the Backspace key to move back a space and delete a character if required. Use the Cancel softkey to cancel
the ACD login.
Your phone logs into the queue on the server.
4. You are logged into the queue and the following screen displays.
5. To allow your phone to be available in the queue, press the Available softkey.
The following screen displays.
If your IP phone status is set to “Available” then the server begins to distribute phone calls from this queue to your
IP phone. You must manually change the state to “Available” in order to start receiving calls.
6. To temporarily stop receiving calls, press the press the Unavailable softkey.
If you are on a call (or miss a call that has been distributed to your phone), your phone status automatically changes
to "Unavailable". Your phone remains in the "Unavailable" state until one of the following occurs:
• You use the IP Phone UI to manually switch the IP phone state back to
"Available"
or
• The availability “timer” for your IP phone expires. This only occurs if your Administrator has configured an auto-
availability timer on your IP phone. Contact your System Administrator for more information.
7. To logout of the queue, press the Log Out softkey. The server no longer distributes phone calls to your IP phone.
ACD: Support
Services
Dir
Callers Icom
Available
Log Out
ACD: Support
Services
Dir
Callers Icom
Unavailable
Log Out