AASTRA 6737i User Guide EN - Manual (Page 37)

Customizing Your Phone
41-001452-00 Rev 01 – 06.2013
30
Set Audio
The "Set Audio" option on the IP Phone allows you to set the audio mode for your IP phone. It also allows you to set the
volume level of the headset microphone and enable/disable DHSG.
You can set Audio on your IP phone using the IP Phone UI only.
Audio Mode
The 6737i allows you to use a handset, a headset, or handsfree mode to handle incoming and outgoing calls. The audio
mode option provides different combinations of these three methods to provide maximum flexibility in handling calls.
There are four audio mode options you can set:
Headset Mic Volume
The "Headset Mic Volume" option allows you to set the volume level for the headset microphone.
DHSG
The “DHSG” option allows you to enable or disable DHSG headset support.
Setting Audio Mode, Headset Mic Volume, and DHSG
Auto Mode Option Description
Speaker This is the default setting. Calls can be made or received using the handset or hands free speakerphone. In handset audio
mode, pressing the key on the phone switches to hands free speakerphone. In Speaker audio mode, lift the hand-
set to switch to the handset.
Headset Choose this setting if you want to make or receive all calls using a handset, or headset connected through the handset
port.
Speaker/Headset
Incoming calls are sent to the hands free speakerphone first when the key is pressed. By pressing the key again,
you can switch back and forth between the hands free speakerphone and the headset. At anytime, lifting the handset
switches back to the handset from either the hands free speakerphone or the headset.
Headset/Speaker
Incoming calls are sent to the headset first when the key is pressed. By pressing the key again, you can switch back
and forth between the headset and the hands free speakerphone. At anytime, lifting the handset switches back to the
handset from either the headset or the hands free speakerphone.
Note:
A DHSG headset and an expansion module cannot be used concurrently as they both share the same headset port.
IP Phone UI
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Set Audio.