AASTRA 6737i User Guide EN - Manual (Page 157)

Managing Calls
41-001452-00 Rev 01 – 06.2013
150
Configuring CFWD Using the Aastra Web UI
Use the following procedure to configure CFWD using the Aastra Web UI.
Aastra Web UI
Note:
(Optional) You can configure a Call Forward key on your phone to access the Call Forward menus if desired. If you do
not configure a Call Forward key, you can still access the Call Forward menu from the IP Phone UI at the path, Options-
>Call Forward.
1. (optional) Click on Operation->Softkeys and XML;
or
Click on Operation->Expansion Module.
Softkeys
2. Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select Call Forward from the list of options.
4. (optional) If required, enable or disable the applicable states for the Call Forward key (Idle, Connected, Incoming,
Outgoing, and/or Busy).
Expansion Module Keys
5. Select from “Key 1” through “Key 36” (M670i)
or
Select from “Key 1” through “Key 60” (M675i)
6. In the "Type" field, select Call Forward from the list of options.
7. Click Save Settings.
Note:
If there is no CFWD key configured on the phone or it is removed, you can still set the CFWD modes via the IP
Phone UI at the path Options->Call Forward.