AASTRA 6737i User Guide EN - Manual (Page 94)

Line Keys and Softkeys
87
41-001452-00 Rev 01 – 06.2013
Sprecode Key
You can set a key to automatically activate specific services offered by the server by setting a key to "sprecode". For
example, if the sprecode value of *82 is configured, then by pressing the key, *82 automatically activates a service pro-
vided by the server. The value you enter for this field is dependent on the services provided by the server. Contact your
System Administrator for information about available services.
Configuring a Sprecode Key
Use the following procedure to configure a Sprecode key on the 6737i IP Phone. The procedure shows the softkey screen
as an example.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select Sprecode.
4. In the "Label" field, enter a label to display on the IP phone for this key.
5. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
6. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the "Connected" state for this softkey.
Expansion Module Keys
7. Select from “Key 1” through “Key 36” (M670i)
or
Select from “Key 1” through “Key 60” (M675i)
8. In the "Type" field, select Sprecode.