Methods for customizing your phone – AASTRA 6737i User Guide EN User Manual
Page 25
Methods for Customizing Your Phone
41-001452-00 Rev 01 – 06.2013
18
The following categories display in the side menu of the Aastra Web UI: Status, Operation, Basic Settings.
Headings
Descriptions
Status
The Status section displays the network status and the MAC address of the IP phone. It also displays hardware and firmware informa-
tion about the IP phone, and information about the SIP account(s) currently configured on the phone. The information in the Network
Status window is read-only.
Operation
User Password - Allows you to change user password.
Phone Lock - Allows you to assign an emergency dial plan to the phone, lock the phone to prevent any changes to the phone and to
prevent use of the phone, and reset the user password.
Softkeys and XML - Allows you to configure up to 6 top softkeys and 6 bottom softkeys with functions identified in the list below. You
can configure up to 10 functions on the top softkeys and up to 20 functions on the bottom softkeys.
Available Functions for Softkeys
Keypad Speed Dial - Allows you to assign a speed dial number to a specific digit on the phone’s keypad for speed dialing purposes.
Expansion Modules - Allows you to configure an additional 36 softkeys with a M670i Expansion Module, or an additional 60 softkeys
with a M675i Expansion Module if an it is attached to the phone. This option displays on the side menu of the Aastra Web UI only if an
Expansion Module is attached. For more information about the expansion modules see
“Model M670i and M675i Expansion Modules”
on
.
Directory - Allows you to copy the Callers List and Directory List from your IP phone to your PC.
Reset - Allows you to restart the IP phone when required.
Basic Settings
Preferences - Allows you to enable/disable the following:
•
Park Call
•
Pick Up Parked Call
•
Display DTMF Digits
•
Play Call Waiting Tone
•
Stuttered Dial Tone
•
XML Beep Support
•
Switch UI Focus to Ringing Line
•
Call Hold Reminder During Active Calls
•
Call Hold Reminder
•
Call Waiting Tone Period
•
Preferred Line
•
Preferred Line Timeout (seconds)
•
Message Waiting Indicator Line
•
DND Key Mode
•
Call Forward Key Mode
This category also allows you to configure:
•
Incoming Intercom Call Settings
•
Group Paging RTP Settings
•
Ring Tones (global and per-line basis)
•
Time and Date Settings
•
Language Settings
Account Configuration - Allows you to configure “Do Not Disturb” (DND) and “Call Forwarding” (CFWD) by account. You can have
multiple accounts on the 6737i.
None
Last Call Return (LCR)
Line
Call Forward
Speed Dial
BLF/Xfer
Do Not Disturb (DND)
Speeddial/Xfer
Busy Lamp Field (BLF)
Speeddial/Conf
BLF/List
Directory
Auto Call Distribution (ACD)
Callers List
Directed Call Pickup
Icom (Intercom)
Extensible Markup Language
(XML)
Services
Flash
Phone Lock
Sprecode
Paging
Park
Empty
Pickup